Hello guest, if you like this forum, why don't you register? https://fanrestore.com/member.php?action=register (December 14, 2021) x


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rating audio tracks quality
#1
Let's talk about audio tracks found on common released media, so leave out AAC, MP3, FLAC and others; MPEG multichannel, even if it could be found on DVD, it is really uncommon (I think maybe I have one title with this codec).

So, given the fact the audio mix is the same, as the number of channels and bits used, I think this could be the chart of most common multichannel audio tracks, from best to worst quality:

  1. PCM/DTS-HD MA/Dolby TrueHD (all lossless)
  2. DTS 1509/1536kbps (full rate)
  3. Dolby Digital 640kbps
  4. Dolby Digital 448kbps
  5. Dolby Digital 384kbps
  6. DTS 755/768kbps (half rate)
  7. Dolby Digital 320kbps
(DTS found on laserdisc should be equiparable to the full rate found on DVD/BD, apart the sampling frequency)
don't know where to place Dolby Digital Plus.

Do you agree?
Reply
Thanks given by:
#2
As I understand it Dolby Digital plus is classed as an HD audio format with a core of 640kbps, so it (should) be superior to ac3 640kbps.
Reply
Thanks given by:
#3
The key is checking source and track quality in audio editing software. This is something I hope to do when I finally build a PC, but it really has gotten to the point, as with digital music releases, that one has to import the audio and check the dynamic range and levels overall between sources. Many LDs I've collected for their soundtracks were unfortunately sourced from lower generation print materials so that their PCM audio can be hissy, scratchy, full of noise or degraded in comparison to the cleaner DD 2.0 DVD audio. But then again, at times the later track can be reduced in dynamic range and over-cleaned leaving the old noisy track preferable.

I guess what I'm trying to say is that the technical numbers are not always the most reliable sign of quality.
Damn Fool Idealistic Crusader
Reply
Thanks given by:
#4
I think spoRv is thinking in terms of 'best case' ie the same master encoded via the different codecs.
Reply
Thanks given by:
#5
(2017-02-14, 12:14 AM)zoidberg Wrote: I think spoRv is thinking in terms of 'best case' ie the same master encoded via the different codecs.

Exactly; I started the thread thinking about a choice I should make: better a 448kbps AC3 (albeit PAL, that needs to be converted to 23.976fps), o a 755kbps DTS (with its high frequency rolloff)?

As by many DTS Full bitrate (1509/1536kbps) sounds as good as 640kbps AC3, mathematically a DTS Half bitrate should sound as good as a 320kbps AC3, hence a 448kbps must sound much better... in theory, of course! Big Grin
Reply
Thanks given by:
#6
Ah.....good idea then.

Wait, half bitrate DTS has a rolloff?
Damn Fool Idealistic Crusader
Reply
Thanks given by:
#7
I agree that to truly rate an audio track, you need to look at the spectral analysis of it and "contrast-and-compare" it to whatever secondary source you have.
Reply
Thanks given by:
#8
I don't understand how a half-bitrate DTS soundtrack can be worse than a AC3 384 kbps one.  Shocked
Same number of channels, similar type of compression but twice the bitrate. How can it be worse?
When I get a DTS track on a DVD I'm usually happy with it as it is less compressed than the regular AC3 tracks.
Reply
Thanks given by:
#9
Because they use different compression algorhythms... it's like MPEG-2 and H.264... how can the latter be better at less than half bitrate than the former? Same answer for AC-3 and DTS.

Also, do not forget the high frequency rolloff of the DTS half rate.

Said that, I love DTS, but, if I should pack more tracks in a single file, and space is a concern, I'd go with a smaller AC-3 version of comparable quality.
Reply
Thanks given by:
#10
Fair enough. People used to say that with AAC over AC3 which in my opinion is pretty stupid. I still prefer AC3.
Your point about DTS seems to be spot-on anyway. I heard about it before but I wasn't sure. Will have to compare all of my DVDs for that matter Tongue
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  LaserDisc dual mono tracks Turisu 19 4,544 2022-07-15, 03:02 AM
Last Post: stwd4nder2
  Streaming: Video/audio quality (bitrate) spoRv 2 1,435 2021-12-21, 08:34 PM
Last Post: spoRv
  [Help] Resyncing audio from completely different masters, potential automation? Mediahead 7 2,590 2021-10-28, 03:28 PM
Last Post: Mediahead
  How lossy is a lossy audio codec? spoRv 12 4,779 2021-09-07, 12:14 PM
Last Post: junh1024
  minimum audio bit-depth needed... spoRv 10 3,530 2021-09-02, 11:24 PM
Last Post: spoRv
  "Left-leaning" audio? deleted user 29 8,159 2020-11-18, 11:43 PM
Last Post: zoidberg
  Optical Tracks and Dolby Onti 5 3,255 2020-09-24, 05:22 PM
Last Post: Onti
  [Help] Mono Audio in 1.0 or 2.0? bendermac 10 4,990 2020-08-24, 05:56 PM
Last Post: pipefan413
  MKV with 2 Video Tracks PDB 6 4,807 2018-04-10, 11:20 PM
Last Post: PDB
  Dolby matrixed audio on modern equipment captainsolo 11 11,310 2016-09-20, 09:43 PM
Last Post: captainsolo

Forum Jump:


Users browsing this thread: 1 Guest(s)