2020-10-01, 05:06 PM
Lovely! Good luck with the capture!
Fanrestore - Fan Restoration Forum
›
Complete projects
›
Released
The Exorcist (1973): Theatrical Cut Reconstruction
The Exorcist (1973): Theatrical Cut Reconstruction
|
The Exorcist (1973): Theatrical Cut Reconstruction
|
Posts: 969
Threads: 67 Joined: 2015 Mar Thanks: 2060
Given 878 thank(s) in 362 post(s) Country: 
Thanks given by: pipefan413
Posts: 1,225
Threads: 51 Joined: 2019 Oct Thanks: 943
Given 654 thank(s) in 384 post(s) Country: 
2020-10-01, 07:37 PM
(2020-10-01, 05:06 PM)The Aluminum Falcon Wrote: Lovely! Good luck with the capture! I'm likely gonna need it. I keep hitting rather frustrating roadblocks with hardware, and as it now stands, the most significant hurdle is getting a capture of the analogue audio alongside video that's both in sync and recorded at a high bit depth and sample rate. I can do either or very easily, but achieving both at once seems to be a challenge. My digital captures are bit perfect at this point, but these analogue-only discs are significantly more precious to me in several cases and they tend to be on older discs that are perhaps more likely to be ticking time bombs (disc rot). The capture software I've been using so far (AmarecTV) appears to be limited to 16-bit audio, which is a shame because it's otherwise excellent. However, I've heard others have had trouble with some sync issues in VirtualDub, which would rather defeat the whole purpose of doing simultaneous V+A cap. I've actually had some inconsistent issues with desync in AmarecTV as well, but I think what it might be is that I need to press play and let the capture card(s) and software figure out the offset as something plays, then put it back to the start and press play and record to get it in sync. That could be coincidental, I'm not sure yet. It does however appear that it can get audio grabbed from devices other than the video capture card and still manage to capture it in sync with the video by working out the latency of that device. So I was able to capture video from the capture card and audio from my sound card simultaneously, and it appeared perceptually to be in sync even though they came from different devices with different latencies. I think AmarecTV is possibly doing this by following the clock from the video capture card and somehow syncing the audio capture from the sound card to that (the "somehow" may be a problem or it may not, I don't know yet). That would all be great except I can't record anything above 16-bit that way, so I'm going to have to cross my fingers and hope that I can also record analogue audio at 24-bit 96 kHz through other software without the sync of that separately recorded audio drifting away from the video. I think what I'll try next is doing a full capture of one of the sides with both V+A recorded by the capture card (so 16-bit 48 kHz) and then redo the full side with the audio being recorded at 24-bit 96 kHz through different software (probably Reaper) and hardware (through my sound card, and/or possibly one of the two USB audio interfaces I've got). That should let me check whether sync is going to drift or not, latency aside. I don't feel particularly hopeful, but perhaps I'll be pleasantly surprised for once... if anybody has any ideas / tips, please throw me a PM! Thanks given by: The Aluminum Falcon
Posts: 1
Threads: 0 Joined: 2020 Oct Thanks: 0
Given 0 thank(s) in 0 post(s) Country: 
2020-10-02, 03:24 AM
Do you guys know where I can see the theatrical cut?
Posts: 5
Threads: 1 Joined: 2020 Aug Thanks: 1
Given 2 thank(s) in 1 post(s) Country: 
2020-11-27, 09:41 PM
I'm interested in this. Where could I get it?
Posts: 1
Threads: 0 Joined: 2021 Apr Thanks: 0
Given 1 thank(s) in 1 post(s) Country:
2021-04-08, 02:30 PM
This was great, thanks for this!
Thanks given by: The Aluminum Falcon
Posts: 7
Threads: 1 Joined: 2021 Jun Thanks: 0
Given 0 thank(s) in 0 post(s) Country:
2021-06-17, 03:47 AM
can someone share this with me?, im still watching the dvd for proper sound and color.
Posts: 2
Threads: 0 Joined: 2021 Aug Thanks: 0
Given 0 thank(s) in 0 post(s) Country: 
2021-08-08, 11:03 PM
Posts: 2
Threads: 0 Joined: 2021 Aug Thanks: 0
Given 0 thank(s) in 0 post(s) Country:
2021-08-09, 09:30 PM
Posts: 5,026
Threads: 174 Joined: 2015 Jan Thanks: 3156
Given 2925 thank(s) in 1283 post(s) Country:
2021-08-09, 09:43 PM
I don’t think it’s available anymore. Please read the rules before posting.
Posts: 2
Threads: 0 Joined: 2021 Jul Thanks: 0
Given 0 thank(s) in 0 post(s) Country:
2021-11-01, 12:57 AM
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 19 Guest(s)