Posts: 715
Threads: 113
Joined: 2015 Apr
Thanks: 260
Given 707 thank(s) in 291 post(s)
Country:
2021-10-03, 11:54 AM
(This post was last modified: 2021-10-03, 11:55 AM by Turisu.)
Is it to compensate for the fact that the front 3 speakers are behind the screen? And if so, is the intention that the audience perceives the levels as the same?
If this is true then the accepted wisdom that cinema DTS rips need to have their surround channels attenuated by -3Db for home viewing would be wrong.
It's interesting when looking at home mixes that are close to their theatrical counterparts as some apply the attenuation and some don't.
Posts: 2,051
Threads: 56
Joined: 2016 Dec
Thanks: 162
Given 1011 thank(s) in 614 post(s)
2021-10-03, 12:03 PM
(This post was last modified: 2021-10-03, 12:03 PM by zoidberg.)
In the theatrical environment the surround speakers are set to an acoustic sum to match each front speaker, this corresponds to -3dB. In the home environment speakers are all set to the same level so the incoming surround level should be attenuated. If I'm wrong please correct me
Posts: 715
Threads: 113
Joined: 2015 Apr
Thanks: 260
Given 707 thank(s) in 291 post(s)
Country:
I guess the pertinent question is how does the audience perceive the sound in the theater? Do the surrounds actually sound quieter than the fronts? Because at home a -3Db drop is going to be quite noticeable.
Posts: 2,051
Threads: 56
Joined: 2016 Dec
Thanks: 162
Given 1011 thank(s) in 614 post(s)
Well the studio in which the audio is mixed is set to the same level so the audience hears what the mix engineers hear
Posts: 7,153
Threads: 601
Joined: 2015 Jan
Thanks: 1081
Given 1466 thank(s) in 963 post(s)
Country:
IIRC the surround channel(s) is(are) set -3dB to compensate the fact there are many speakers for each channel(s) instead one for each in the front, so to let each speaker sounds a bit lower - think about viewers very close to side or back speaker - while when heard all together the summed level lead to the right one.
At home (if I'm not mistaken) it *should* be set 3dB higher than theater becasue any channel has its own speaker - unless we are talking about Dolby Surround (the original)/Pro Logic or EX or DTS-ES when a single channel pilots two speakers...
About the wrong level on some Cinema DTS (and subsequently laserdisc, where DVD were corrected AFAIK) it was one of the two, I can't remember which though:
- at the beginning studios sent mixes with same levels set, hence subwoofer 3dB and LFE 10db hotter
- first APT-X100 decoded (at home) decoded levels in the wrong way, then new versions corrected it
Posts: 2,051
Threads: 56
Joined: 2016 Dec
Thanks: 162
Given 1011 thank(s) in 614 post(s)
It's 82db per channel, not per speaker. The left and right surround channels acoustically sum up to 85dB, it goes back to when surrounds were mono and carried over into the discrete age. Also room calibration almost invariably is based on an optimal listening position somewhere in the middle so viewers too far front/back/to either side will hear a less balanced mix.
