Hello guest, if you like this forum, why don't you register? https://fanrestore.com/member.php?action=register (December 14, 2021) x


Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Released] Terminator 2 CDS mix
(2017-12-03, 10:01 AM)Stamper Wrote: Is that a monitor hum I see at 16khz?


Looks that way. I just noticed the same thing in a trailer I was watching. Whenever the voices became louder, this high frequency pheeping came in too. I used to think that this was somehow done on purpose, but with a notch filter to get rid of it, it sounds much better and less painful. Quite fascinating.
Reply
Thanks given by:
I can confirm, that the 4:3 Disc is from Russia. It seemed to be a normal release there...
"Never cut a deal with a dragon..."
- Old Shadowrun wisdom
Reply
Thanks given by:
I found a French HD DVD, but unfortunately it seems to be a different one. It's the TC and appears to contain the new mix and an authoring error.

Quote:EVO, 1 video track, 3 audio tracks, 2:17:15
1: Joined EVO file
2: Chapters, 12 chapters
3: VC-1, 1080p24 /1.001 (16:9) with pulldown flags
4: DTS, French, 5.1 channels, 1509kbps, 48kHz
5: DTS Master Audio, English, 5.1 channels, 16 bits, 48kHz
  (core: DTS, 5.1 channels, 1509kbps, 48kHz)
6: DTS, French, 2.0 channels, 768kbps, 48kHz
[v03] This EVO/VOB file contains authoring faults. Will try to work around that. (263)  <WARNING>

[Image: 2QgGjm3.jpg]

Does the other HD DVD show an authoring error when demuxing with eac3to?
Reply
Thanks given by:
My contains that authoring error, also.

Are you sure that it is the new mix? ATM, I think best indicator is the percussion at the beginning, when/after the resistance guy is killed, with the new mixes it is totally absent.
"Never cut a deal with a dragon..."
- Old Shadowrun wisdom
Reply
Thanks given by:
I didn't listen to it, but if that's what the 5.1 looks like on the HD DVD, the DVD is a better source.

EDIT: I think you might be right and that it's the new mix. If so, there's been some sort of processing applied. I wondered if something like this might happen. If there's one thing I've learnt from Moshrom's blog it's that the source with the best specs doesn't always contain the best audio.
Reply
Thanks given by:
(2017-12-03, 01:53 PM)Chewtobacca Wrote: I didn't listen to it, but if that's what the 5.1 looks like on the HD DVD, the DVD is a better source.

Could it be, that StudioCanal just did a shitty job by reencoding the compressed DTS Track, to have the DTS-MA selling point?

Edit:
The japanese DVD was also from StudioCanal, at least it contains the StudioCanal Logo on the front side.
"Never cut a deal with a dragon..."
- Old Shadowrun wisdom
Reply
Thanks given by:
(2017-12-03, 02:01 PM)MrBrown Wrote: Could it be, that StudioCanal just did a shitty job by reencoding the compressed DTS Track, to have the DTS-MA selling point?

I think it's more likely that the track was processed somehow.
Reply
Thanks given by:
It's all in the mix Smile

MrBrown, could you send me the HD-DVD track to check out?
Reply
Thanks given by:
Looks like noise reduction was applied to the HD-DVD, watch the cut off of the hum at 16khz.
The Blu-ray was released about a year later I hope there is no authoring mistake.

Chewbacca looks like the Japan DTS is the best so far no?

Is the HD-DVD in the right tone? Studio Canal had a few released then with pitched Pal audio stretched to 24fps.
Reply
Thanks given by:
All spectrograms in one post...

Stamper's BD

[Image: title00_T2_CDSBRmix.w64.png]

MrBrown's HD DVD

[Image: L0_main_Movie_-_5_-_DTS_Master_Audio_Eng...s_16_b.png]

My HD DVD (possibly the same)

[Image: 2QgGjm3.jpg]

DTS from JP DVD:

[Image: b27PHSj.jpg]

AC-3:

[Image: 6D0XH9M.jpg]

So far, I think the JP DVD is the best source.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Released] Terminator 1 MGM DVD Mono synced to 2012 BD Red41804 1 867 2024-02-17, 11:42 PM
Last Post: weegee2392
  The Terminator (1984) Chace "Fake Stereo" LD Analog jerryshadoe 51 47,024 2021-02-05, 09:03 PM
Last Post: aseddon130

Forum Jump:


Users browsing this thread: 56 Guest(s)