[Help] Slow down or speed up Audio for projects

[bendermac]

I usually not keen in slowing down or speedin up audio, but sometimes you've to do it. So what are the best method to match the audio to a specific framerate?
Any suggestions for any of the following programs:

Adobe Audition
Audacity
Apple Logic Pro

I think you also need to take the change of sample rate into consideration. Anything I need to be aware of?

Thanks for the help

[alexp2000]

Audacity - ‘change tempo’ was what I was told (by Jerry on here I think)

[zoidberg]

eac3to can slowdown PAL or film speed (24.000) to 23.976

[bendermac]

eac3to can slowdown PAL or film speed (24.000) to 23.976

I tried eac3to. Result was bad. I used -slowdown and -23976 commands. Resulting output was longer then it should've been. Therefor unusable

[HippieDalek]

eac3to can slowdown PAL or film speed (24.000) to 23.976

This is what I use, though I'm mostly adjusting 23.976 and PAL to 24.000 fps.

[zoidberg]

If it's PAL all you need is the -slowdown command. It looks like you gave eac3to a 23,976fps file and asked it to slow it by a factor of roughly 1000

[bendermac]

In my case it was 24fps as source and result needed to be 23,976fps

But I asked here more in general

[zoidberg]

Try

Code:

input output -24.000 -changeto23.976

[bendermac]

Try

Code:

input output -24.000 -changeto23.976

Result is

Code:

WAV, 2.0 channels, 2:08:13, 16 bits, 1411kbps, 44.1kHz Reading WAV... Changing FPS from 24.000 to 23.976... Reducing depth from 64 to 24 bits... Writing WAV... Creating file "\\Mac\Home\Desktop\test.wav"... The original audio track has a constant bit depth of 16 bits. The processed audio track has a constant bit depth of 24 bits. eac3to processing took 3 minutes, 36 seconds. Done.

Not happy with the change from 16bit to 24bit

[zoidberg]

If you want to keep the file 16bit use -down16 at the end of your command line