This project series is probably done with. Future project using 35 elements will just their own beasts.

---------------------------------------
Couldn't find a better title for this project so bear with the name.

The overall goal of this project is to take existing HD masters and change the colors to look more like a 35mm print using 35mm materials. This originally started out as a sister project to my upscale project here:

https://fanrestore.com/thread-1071.html

In the upscale project I took the final video and tried to color grade it to match picture of 35mm frames. I wanted to take that idea and apply it to HD masters but go one step further. I have bought several trailers from movies and scanned them myself. It's often said that a trailer might not be fully color timed but that doesn't mean that they are wrong, all the time. In fact most of the 35mm trailer scans I have seen match prints pretty well. I then took the scanned color information, generated a LUT(s) and applied it to the existing HD master to color grade it. It's not without it's fault but creates a fun alternative to the existing HD masters and is an easier way of trying to get closer to the look of a film without the expense of tracking down an actual 35mm print.

So this thread is like my upscale thread, to test ideas and concepts for this project and get opinions from fellow fanres-ers.

A little bit of note. While I do try to even out colors to reflect projection and what current video standards are, you should still expect high contrast, occasional blow-out and saturated colors as you would see in a 35mm print. If you hate that look you may not like these project.
---------------------------------------------------------------------------------------------------------------------------------
1. Temple Of Doom (35 Project #1 v1.0)

See More Here:
https://fanrestore.com/thread-1840.html

Status:
Done

Video:
The BD image color corrected using a LUT to match the 35mm trailer scans, 35mm frames and other 35mm sources

Audio:
1. PCM 2.0 from the US Widescreen laserdisc

2. DTS-HD MA 5.1 from the US BD

3. PCM 5.1 (TomArrow's Dolby Surround upmix of the Paramount Widescreen Laserdisc PCM 2.0)

Pics:

MKV Pics


BD/Regrade - Out of Date

---------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------
2. Die Hard with A Vengeance (35 Project #2 v1.3)

See More Here:
https://fanrestore.com/thread-1814.html

Status:
Done

Video:
The BD image color corrected using a LUT(s) to match a 35mm print showing.

Audio: (Tentative)
1. DD/AC3 5.1 from the THX DVD

2. PCM 2.0 from the THX LD (depends on space)

3. DTS 5.1  or full DTS- HD MA from the BD (depends on space)

Pics:
MKV Pics


BD/BD Regrade (Updated 5/23/18- Out of Date)

---------------------------------------------------------------------------------------------------------------------------------
3. Dawn of the Dead Regrade (35 Project #3 v1.11)

See More Here:
https://fanrestore.com/thread-2132.html

Status:
Done

Video:
US Anchor Bay Blu-Ray regraded to various 35mm trailers

Audio:
1. PCM 2.0 Mono (from the Full Screen/Open Matte Laserdisc)
2. DD/AC-3 2.0 Mono (from the AB BD)

Pics:

MKV Pics



BD/BD regraded to trailer (Updated 5/23/18- Out of Date)

---------------------------------------------------------------------------------------------------------------------------------

Coming Soon:

Sleepy Hollow
Event Horizon

Great stuff PDB.
As always I look forward to this / these projects from you.

Die Hard 2 looked awesome and those Alien 3 screens seem to promise more of the same

I have a Japanese DVD of Sleepy Hollow which features a full bit rate DTS track if you want it

For Alien 3 Theatrical I have the Home Video DTS that was exclusive to the Japan Quadrilogy, if you want it.

I have seen a 35mm print of Alien 3 last month as part of a Fincher movie cycle in Paris, France. I compared with Sporv's Fundamental Collection right after. Here's what I told him :

OK, so the print was in its near death, as a pink emulsion stain starts to spread. The lower middle part of the entire movie was affected. But the rest was fine. So I can tell you that your Fundamental regrade is very much better than the Blu-ray. The Blu-ray is too cold, your regrade is pretty much accurate except that sometimes it’s too warm. The very end for exemple is very very warm on your work. Actually, the Blu-ray would be a better match with a TV screen color temperature set to “warm”. Your regrade as well has to be seen with the “warm” setting. Except for the end that should be cooler and at least one other scene at 22’00 (the panning shot is too red). Since the print is in the beginning of its end, I will not come back to see it and will not take pictures of it. Oh, and the whole film on 35mm is darker than either the Blu-ray or your regrade.

Bless you, good sir!

(2017-08-29, 08:12 PM)CSchmidlapp Wrote: Great stuff PDB.
As always I look forward to this / these projects from you.

Die Hard 2 looked awesome and those Alien 3 screens seem to promise more of the same

Thanks CSchmidlapp!

(2017-08-29, 08:16 PM)Bigrob Wrote: I have a Japanese DVD of Sleepy Hollow which features a full bit rate DTS track if you want it

Thanks Bigrob. I'm unsure if I will put a third track on SH. Is it labeled as DTS-ES?

(2017-08-29, 09:33 PM)Jetrell Fo Wrote: For Alien 3 Theatrical I have the Home Video DTS that was exclusive to the Japan Quadrilogy, if you want it.

Thanks Jetrell, let me nail down the audio tracks for that first then see if it will fit, appreciate it.

(2017-08-29, 09:51 PM)Beber Wrote: I have seen a 35mm print of Alien 3 last month as part of a Fincher movie cycle in Paris, France. I compared with Sporv's Fundamental Collection right after. Here's what I told him :

OK, so the print was in its near death, as a pink emulsion stain starts to spread. The lower middle part of the entire movie was affected. But the rest was fine. So I can tell you that your Fundamental regrade is very much better than the Blu-ray. The Blu-ray is too cold, your regrade is pretty much accurate except that sometimes it’s too warm. The very end for exemple is very very warm on your work. Actually, the Blu-ray would be a better match with a TV screen color temperature set to “warm”. Your regrade as well has to be seen with the “warm” setting. Except for the end that should be cooler and at least one other scene at 22’00 (the panning shot is too red). Since the print is in the beginning of its end, I will not come back to see it and will not take pictures of it. Oh, and the whole film on 35mm is darker than either the Blu-ray or your regrade.

Thanks for the rundown Beber, that is helpful.

(2017-08-30, 03:56 AM)applesandrice Wrote: Bless you, good sir!

Thanks applesandrice!

Tell me, when can this project come from you?

Mission Impossible Ghost Protocol (IMAX Recreation)

(2017-08-30, 08:26 PM)maksnew Wrote: Tell me, when can this project come from you?

Mission Impossible Ghost Protocol (IMAX Recreation)

Thanks for the interest but that's a question that's better suited for that thread. But since you asked, the footage that shonenbat gave me is great but sadly even at 1080i has less detail then the 720p FXX broadcast. The FXX has more detail and less blocking then any other HD copies I have...which is strange. They also have different color timing, the FXX is reddish like the BD (also the Telemundo) and Epix is greener, so it doesn't work 100% as a fill for the logo. So it just takes time to sort it out. It can never be 100% perfect but I rather not release something that I know I can fix.